Writes data to an internal memory buffer, which grows as required. More...

Inheritance diagram for MemoryOutputStream:

Public Member Functions
	MemoryOutputStream (size_t initialSize=256)
	Creates an empty memory stream, ready to be written into. More...

	MemoryOutputStream (MemoryBlock &memoryBlockToWriteTo, bool appendToExistingBlockContent)
	Creates a memory stream for writing into into a pre-existing MemoryBlock object. More...

	MemoryOutputStream (void *destBuffer, size_t destBufferSize)
	Creates a MemoryOutputStream that will write into a user-supplied, fixed-size block of memory. More...

	~MemoryOutputStream ()
	Destructor. More...

const void *	getData () const noexcept
	Returns a pointer to the data that has been written to the stream. More...

size_t	getDataSize () const noexcept
	Returns the number of bytes of data that have been written to the stream. More...

void	reset () noexcept
	Resets the stream, clearing any data that has been written to it so far. More...

void	preallocate (size_t bytesToPreallocate)
	Increases the internal storage capacity to be able to contain at least the specified amount of data without needing to be resized. More...

bool	appendUTF8Char (juce_wchar character)
	Appends the utf-8 bytes for a unicode character. More...

String	toUTF8 () const
	Returns a String created from the (UTF8) data that has been written to the stream. More...

String	toString () const
	Attempts to detect the encoding of the data and convert it to a string. More...

MemoryBlock	getMemoryBlock () const
	Returns a copy of the stream's data as a memory block. More...

void	flush () override
	If the stream is writing to a user-supplied MemoryBlock, this will trim any excess capacity off the block, so that its length matches the amount of actual data that has been written so far. More...

bool	write (const void *, size_t) override
	Writes a block of data to the stream. More...

int64	getPosition () override
	Returns the stream's current position. More...

bool	setPosition (int64) override
	Tries to move the stream's output position. More...

int64	writeFromInputStream (InputStream &, int64 maxNumBytesToWrite) override
	Reads data from an input stream and writes it to this stream. More...

bool	writeRepeatedByte (uint8 byte, size_t numTimesToRepeat) override
	Writes a byte to the output stream a given number of times. More...

Public Member Functions inherited from OutputStream
virtual	~OutputStream ()
	Destructor. More...

virtual bool	writeByte (char byte)
	Writes a single byte to the stream. More...

virtual bool	writeBool (bool boolValue)
	Writes a boolean to the stream as a single byte. More...

virtual bool	writeShort (short value)
	Writes a 16-bit integer to the stream in a little-endian byte order. More...

virtual bool	writeShortBigEndian (short value)
	Writes a 16-bit integer to the stream in a big-endian byte order. More...

virtual bool	writeInt (int value)
	Writes a 32-bit integer to the stream in a little-endian byte order. More...

virtual bool	writeIntBigEndian (int value)
	Writes a 32-bit integer to the stream in a big-endian byte order. More...

virtual bool	writeInt64 (int64 value)
	Writes a 64-bit integer to the stream in a little-endian byte order. More...

virtual bool	writeInt64BigEndian (int64 value)
	Writes a 64-bit integer to the stream in a big-endian byte order. More...

virtual bool	writeFloat (float value)
	Writes a 32-bit floating point value to the stream in a binary format. More...

virtual bool	writeFloatBigEndian (float value)
	Writes a 32-bit floating point value to the stream in a binary format. More...

virtual bool	writeDouble (double value)
	Writes a 64-bit floating point value to the stream in a binary format. More...

virtual bool	writeDoubleBigEndian (double value)
	Writes a 64-bit floating point value to the stream in a binary format. More...

virtual bool	writeCompressedInt (int value)
	Writes a condensed binary encoding of a 32-bit integer. More...

virtual bool	writeString (const String &text)
	Stores a string in the stream in a binary format. More...

virtual bool	writeText (const String &text, bool asUTF16, bool writeUTF16ByteOrderMark)
	Writes a string of text to the stream. More...

void	setNewLineString (const String &newLineString)
	Sets the string that will be written to the stream when the writeNewLine() method is called. More...

const String &	getNewLineString () const noexcept
	Returns the current new-line string that was set by setNewLineString(). More...

Additional Inherited Members
Protected Member Functions inherited from OutputStream
	OutputStream ()

Detailed Description

Writes data to an internal memory buffer, which grows as required.

The data that was written into the stream can then be accessed later as a contiguous block of memory.

Constructor & Destructor Documentation

MemoryOutputStream::MemoryOutputStream ( size_t initialSize = 256 )

Creates an empty memory stream, ready to be written into.

Parameters

initialSize the intial amount of capacity to allocate for writing into

MemoryOutputStream::MemoryOutputStream	(	MemoryBlock &	memoryBlockToWriteTo,
		bool	appendToExistingBlockContent
	)

Creates a memory stream for writing into into a pre-existing MemoryBlock object.

Note that the destination block will always be larger than the amount of data that has been written to the stream, because the MemoryOutputStream keeps some spare capactity at its end. To trim the block's size down to fit the actual data, call flush(), or delete the MemoryOutputStream.

Parameters

memoryBlockToWriteTo	the block into which new data will be written.
appendToExistingBlockContent	if this is true, the contents of the block will be kept, and new data will be appended to it. If false, the block will be cleared before use

MemoryOutputStream::MemoryOutputStream	(	void *	destBuffer,
		size_t	destBufferSize
	)

Creates a MemoryOutputStream that will write into a user-supplied, fixed-size block of memory.

When using this mode, the stream will write directly into this memory area until it's full, at which point write operations will fail.

MemoryOutputStream::~MemoryOutputStream ( )

Destructor.

This will free any data that was written to it.

Member Function Documentation

const void* MemoryOutputStream::getData ( ) const

noexcept

Returns a pointer to the data that has been written to the stream.

See also: getDataSize

size_t MemoryOutputStream::getDataSize ( ) const

noexcept

Returns the number of bytes of data that have been written to the stream.

See also: getData

References OutputStream::flush(), toString(), and OutputStream::write().

void MemoryOutputStream::reset ( )

noexcept

Resets the stream, clearing any data that has been written to it so far.

void MemoryOutputStream::preallocate ( size_t bytesToPreallocate )

Increases the internal storage capacity to be able to contain at least the specified amount of data without needing to be resized.

bool MemoryOutputStream::appendUTF8Char ( juce_wchar character )

Appends the utf-8 bytes for a unicode character.

String MemoryOutputStream::toUTF8 ( ) const

Returns a String created from the (UTF8) data that has been written to the stream.

String MemoryOutputStream::toString ( ) const

Attempts to detect the encoding of the data and convert it to a string.

See also: String::createStringFromData

Referenced by CppTokeniserFunctions::addEscapeChars().

MemoryBlock MemoryOutputStream::getMemoryBlock ( ) const

Returns a copy of the stream's data as a memory block.

void MemoryOutputStream::flush ( )

overridevirtual

If the stream is writing to a user-supplied MemoryBlock, this will trim any excess capacity off the block, so that its length matches the amount of actual data that has been written so far.

Implements OutputStream.

bool MemoryOutputStream::write	(	const void *	dataToWrite,
		size_t	numberOfBytes
	)

overridevirtual

Writes a block of data to the stream.

When creating a subclass of OutputStream, this is the only write method that needs to be overloaded - the base class has methods for writing other types of data which use this to do the work.

Parameters

dataToWrite	the target buffer to receive the data. This must not be null.
numberOfBytes	the number of bytes to write.

Returns: false if the write operation fails for some reason

Implements OutputStream.

int64 MemoryOutputStream::getPosition ( )

overridevirtual

Returns the stream's current position.

See also: setPosition

Implements OutputStream.

References JUCE_CALLTYPE, JUCE_DECLARE_NON_COPYABLE_WITH_LEAK_DETECTOR, operator<<(), OutputStream::setPosition(), OutputStream::writeFromInputStream(), and OutputStream::writeRepeatedByte().

bool MemoryOutputStream::setPosition ( int64 newPosition )

overridevirtual

Tries to move the stream's output position.

Not all streams will be able to seek to a new position - this will return false if it fails to work.

See also: getPosition

Implements OutputStream.

int64 MemoryOutputStream::writeFromInputStream	(	InputStream &	source,
		int64	maxNumBytesToWrite
	)

overridevirtual

Reads data from an input stream and writes it to this stream.

Parameters

source	the stream to read from
maxNumBytesToWrite	the number of bytes to read from the stream (if this is less than zero, it will keep reading until the input is exhausted)

Returns: the number of bytes written

Reimplemented from OutputStream.

bool MemoryOutputStream::writeRepeatedByte	(	uint8	byte,
		size_t	numTimesToRepeat
	)

overridevirtual

Writes a byte to the output stream a given number of times.

Returns: false if the write operation fails for some reason

Reimplemented from OutputStream.

The documentation for this class was generated from the following file:

juce_MemoryOutputStream.h

Public Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation